Jump to content

CODIFICACIONES OBDELEVEN / OBD11


Edu82

Publicaciones recomendadas

Hola. Abro este hilo para ver si podemos aportar un poco de información entre todos sobre este obd. En youtube tiene su propio canal y hace casi todas las modificaciones con un solo clic.

 

He estado buscando un poco sobre el y en principio parece bastante interesante. Parece ser que aporta,en gran mayoría,lo mismo que vagcom pero con una interfaz mucho mas cómoda e intuitiva.

 

Su precio,con la versión pro,que es la que puede codificar y hacer modificaciones es de unos 57€.

Yo la verdad que estoy bastante interesado en comprarlo.

 

Que opináis?pros y contras.

 

Mensaje editado el 30/11/2020 para añadir las codificaciones básicas de OBDEleven:

 

De Activation of Start-Stop
Select Control unit 19 (can gateway)
Adaptation
Start-Stop Voltage Limit>12V (New Value)

Sunroof Opening With Remote Control
Select Control unit 09 (Central Electrics)
Security access
Security Code: 31347
Adaptation
Select (9) Access control 2-SAD Richtung Komfortoeffnen > Open

Traffic Sign Assist Activation
Select Control unit 5F (Information Electrical)
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_threshold_high
Değer=Active
Control unit A5 (front / advance camera)
Security access
Access Code 20103
Control unit Long Coding
Byte 1
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active"
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111

Line Assist Activation
Select Control unit 17 (Dashboard)
Control unit Long Coding
Bye 4
Bit 6 Activate
Bye 11
Bit 1 Activate
Select Control unit A5 (front / advance camera)
Control unit Long Coding
Bye 0
Bit 0 Activate
Select Control unit A5 (front / advance camera)
Security access
Access Code 20103
Adaptation
Channel - Seçim HCA_On_State
Put emphasis on menu
Channel - Seçim HCA_Warning_intensity
Put emphasis on menu
Channel - Seçim BAP_Personalisierung
Put emphasis on not activated
Select the time of engagement
Set adjustment via menu - emphasis on late
Select Personalization spurt holding an assistant to a terminal 15 - channel
Set value to last setting
Select Control unit 44 (power steering)
Control unit Long Coding
Bye 0
Bit 0 Aktif
Select Control unit 5F (Informationselektronik)
Adaptation
(49) function -Vehicle list BAP LDW_HCA_0x19
Activate
(21) vehicle menu operation-menu_display_Lane_Departure_Warning
Activate
(23) vehicle menu Bedienung_menu_display_Lane_Departure_Warning_over_threshold_high – channel
Activate

Line Assist Adjustments
Steering Wheel Vibration
Select Control unit A5 (camera)
Security access
Enter unlock code 20103
Adaptation
Select channel intensity steering wheel vibration
Value adjust accordingly Default: medium options: early, middle, late

Blocking of Drivers Reaction
Select Control unit A5 (camera)
Security access
Enter unlock code 20103
Adaptation
Select channel deactivation threshold driver activity
Value adjust accordingly Default: medium options: early, middle, late

Steering Wheel Support
Select Control unit A5 (camera)
Security access
Enter unlock code 20103
Adaptation
Select channel intensity wheel support
Value adjust accordingly Default: medium options: early, middle, late

Cornering Fog Light Activation
Select Control unit 09 (Central Electrics)
Security access
Security Code 31347
Adaptation
Select: channel (5) Leuchte12NL LB45 Light Function B12
New Value cornering left
Select: channel (5) Leuchte13NL RB5 light function B13
New Value cornering right
Select: channel (2) static cornering light regulation ECE R48
New Value ECE R48 / ECE R119

Adjusting Cornering Fog Light Sensitivity
Select Control unit 09 (Central Electrics)
Security access
Security Code 31347
Adaptation
(3) Static cornering light lower speed threshold
New Value=0
(4) Static cornering light upper speed threshold
New Value=50

Adjusting Headlight Washer Cycle
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (1) - Seçim windscreen wiper Number of operations Front wash per SRA activation
Adjust Value accordingly
Channel (3) - Seçim windshield wipers SRA washing time
Adjust Value accordingly

Seat Heater Adjustment
Select Control unit 08 (Air condition A/C)
Adaptation
Select reheating Air condition A/C condition A/C
Change value as you wish (default: 10 minutes)

Activation of Voice Command
Select Control unit 5F (infotainment)
Control unit Long Coding
Byte 24
Bit 1 Activate

Enable Mirror Heating
Select Control unit 52 (Türelektr. Beifahr.)
Control unit Long Coding
Byte 04
Bit 0 DeActivate
Select Control unit 42 (Türelektr. Driver)
Control unit Long Coding
Byte 04
Bit 0 DeActivate

Saving Seat Heating Stage
Select Control unit 08 (Air condition A/C)
Adaptation
Select: channel storage seat heating stage driver
Adjust value to active (default value: not activated)
Select: channel storing the front passenger seat heating stage
Adjust value to active (default value: not activated)

Gear Change Assist on FIS
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 1
Bit 5 Activate

Oil Temprature on FIS
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 10
Bit 1 Activate

Activation of Lap Timer
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 1
Bit 3 Activate

Adjusting Microphone Sensitivity
Select Control unit 5F (infotainment)
Adaptation
Select Mikrofonempfindlichtkeit (Microphone Sensitivity)
Adjust value as you wish.

Keyless Go Locking/Unlocking
Select Control unit 05 (entry / start authorization)
Control unit Long Coding
Bye 2
Bit 4 Activate


Fan Speed on Auto Mod
Select Control unit 08 (Air condition A/C)
Control unit Long Coding
Byte 11
Bit 6 Activate

High Beam Assist Reset
Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (4) Seçim -Assistenzlichtfunktionen-Beam Assistant reset
Value on not actively adjust default: active

Seat Belt Warning
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 0
Bit 2 Deactivate

Activation of Audi Parking System
Select Control unit 10 (parking aid)
Control unit access authorization - Seçim function 16
Access Code: 71679
Coding
Byte 2
Bit 0 - visual representation of parking assistance - activate

Shot Down Warning Tone for Parking System
Select Control unit 10 (parking aid 2)
Adaptation
Select requirement Audio reduction
New Value: NO(default value: yes)

Parking Warning Distance Change
Select Control unit 10 (parking aid 2)
Adaptation
Select distance to the curb
Adjust as you wish.

APS Shot Down Value
Select Control unit 10 (parking aid 2)
Adaptation
Select shutdown parking aid
Adjust as you wish.

US Park Lights
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (12) 0 BLK light fitting VL B36-light function E 0 Seçim (turn signal front left)
Adjust Value on daytime running lights
Channel (14) 0 BLK light fitting VL B36-dimming EF Seçim 0
Adjust Value accordingly (dimming level in percent; Recommendation value: 30 (30%))
Channel (12) -Leuchte1BLK VRB20 Light Function E 1 Seçim (Indicator front right)
Adjust Value on daytime running lights
Select channel (14) -Leuchte1BLK VRB20-dimming EF 1
Adjust Value accordingly (dimming level in percent)
Select channel (16) -Leuchte0BLK VL-B36 Lichfunktion G 0
Adjust Value Blink left dark phase
Select channel (19) -Leuchte0BLK VL B36 dimming Direction GH 0
Adjust value to minimize
Select channel (16) -Leuchte1BLK VRB20 light function G 1
Adjust Value Blink right dark phase
Select channel (19) -Leuchte1BLK VRB20 dimming Direction GH 1
Adjust value to minimize

Hill Hold Assist Duration
Select Control unit 03 (Brakes)
Adaptation
Select Berganfahrassistent
Adjust as you wish. (default: Normal)

Activation of Ambient Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 17
Bit 3 Activate - MMI settings
Bit 2 Activate - front footwell lighting
Bit 1 Activate - door lighting
Select Control unit 5F (infotainment)
Adaptation
Select channel (6) Menu operation vehicle-menu_display_ambient_illumination
value to adjust activated
Select channel (8) Menu operation vehicle-menu_display_ambient_illumination_over_threshold_high
value to adjust activated
Channel (15) vehicle function list BAP interieur_light_0x08 Select
a value to adjust activated

Using Flashing Signals as DLR
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (6) - Daytime Running Lights - daytime running lights activated additionally select standlight
Put emphasis on active

Avoid Dimming LED Lights when blinking
Seelct Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (10) -Leuchte2SL VLB10-dimming CD 2 Select
Set value to 100
Select channel (10) -Leuchte3SL VRB21-dimming CD 3
Value set to 100 (default: 30)

Enable-Disable DLR on MMI
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Select daytime running light activation by BAP or Operating sequence possible - channel (2)
Put emphasis on active

DLR Only in Auto Mode
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
Channel (9) - Select daytime running lights only in switch position auto
Put emphasis on active

De Activation of DRL with Hand Break
Select Control unit 09 (Central Electrics)
Security access
Enter access code 31347
Adaptation
Select off when handbrake daytime running lights - channel (5) - Daytime Running Lights
Put emphasis on active

Activation of Driving School Mode
Select Control unit 5F (infotainment)
Adaptation
Select vehicle function list CAN Driving School - channel (11)
Adjust value on available
Channel (171) - Vehicle Menu operation - Select menu_display_driving_school
Set value to enabled
Channel (171) - Vehicle Menu operation - Select menu_display_driving_school_over_threshold_high
Set value to enabled

ACT Control on FIS
Select Control unit 17 (Dashboard)
Adaptation
Select channel cylinder deactivation
Change enabled (default value: No display)

Highway Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Subsystem: Rain / Light Sensor (RLS)
Byte 0
Bit 0 Activate

CD Eject Button Activation
Select Control unit 5F (Informationselektronik)
Adaptation
Select channel 10
1 -Eject Lock Active
0 - Eject Lock De-Active

Lower Passenger Mirror When Reverse Gear
Select Control unit 52 (Türelektr. Beifahr.)
Control unit Long Coding
Byte 04
Bit 2-Active
Bit 3-Active
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 04
Bit 3-Active

MMI PLUS Hidden Menu
Select Control unit 5F (infotainment)
Adaptation
Channel 06
New Value: 1
After coding, push the Car+Menu button in the same time.

MMI Basic Hidden Menu
Select Control unit 56 (Radio)
Adaptation
Channel 05
New Value: 1
After coding, push the Car+Menu button in the same time.

Comin Home Light Duration
Select Control unit 09 (Central Electrics)
Adaptation
Coming Home Time
Value (Default: 15 seconds - maximum: 60 seconds)
Select Control unit 09 (Central Electrics)
Adaptation
Leaving Home Time
Value(Default: 60 seconds - maximum: 60 seconds)

Comin Home/Leaving Home with Fog and LED
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 17
Bit2-Bit3 Activate.

Lock Acknowlegde with Horn
Horn When Locked
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 1 Activate

Horn When UnLocked
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 4 Activate

Controlling in MMI Menu
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 2 De-Activate

Pointer Test
Select Control unit 17 (Dashboard)
Adaptation
Select Channel staging
New Value:Active

Adjust Consumption Indıcator
Select Control unit 17 (Dashboard)
Adaptation
Customize consumption indicator
Basic Değeri 100
Value change 85 (%) and 115 (%) .

Folding Mirror when Doors Lock
Select Control unit 42 (door Electrical driver)
Control unit Long Coding
Byte 4
Bit 6 Activate
Control unit 52 (door Electrical front passenger)
Control unit Long Coding
Byte 4
Bit 6 Activate

Emergency Break/Flashing Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 16
Bit 1 Activate
Bit 2 Activate

 

 

 

 

 

 


 

Aplicación oficial Android: Enlace al Play Store

Tienda oficial: Web oficial

Manual y ayuda (es Español): Enlace a CPSL

Editado por FrA1l3
Añadir codificaciones básicas
Enlace al comentario
Compartir en otros sitios web


Interesante, yo estoy por comprar el cable sólo para activar la visualización del APS trasero, pero viendo esto puede ser una opción más sencilla.

 

He estado viendo los vídeos y no he visto ninguno que active esto, con lo que no se si se podrá hacer con esta app.

 

Enviado desde mi SM-G361F mediante Tapatalk

Enlace al comentario
Compartir en otros sitios web

https://www.youtube.com/watch?v=gpGSPez9xzE

 

Video en movimiento... mmm

 

Yo no me he decidido a comprar el famoso vagcom porque me considero un autentico manazas tecnologico y seguro que la lio parda, pero he leido mucho sobre las mods de muchos de vosotros (alguna me atrae y otra no tanto y ya me viene de serie como el espejo derecho inclinable), pero he seguido especialmente el tema del video en movimiento y se que habeis investigado muchisimo.

Este aparatito veo que lleva tiempo en el mercado estadounidense, ¿En serio no es un poco raro que de pronto por 57 esto resuelva el quebradero de cabeza del video en movimiento de una forma tan sencilla y nadie lo hubiese visto antes?.

No es por sospechar, pero desde mi ignorancia, si fuese asi me lo compro mañana mismo, porque se ve super intuitivo y en la pagina web dice que la version para españa esta traducida al 51% al español

Editado por Asturmontes
Enlace al comentario
Compartir en otros sitios web

Yo me he descargado la aplicación gratuita que esta en play store y mas o menos sale todo lo que puedes hacer ,y si,viene casi todo en español. Yo lo mas seguro que lo compre y probaré. Ya cuento que tal.

 

También he pensado que parece muy bueno para que no lo tenga nadie,de ahi mi duda. Pero como dije anteriormente en un foro de seat leon tienen un hilo y todo.

Enlace al comentario
Compartir en otros sitios web

Yo me he descargado la aplicación gratuita que esta en play store y mas o menos sale todo lo que puedes hacer ,y si,viene casi todo en español. Yo lo mas seguro que lo compre y probaré. Ya cuento que tal.

 

También he pensado que parece muy bueno para que no lo tenga nadie,de ahi mi duda. Pero como dije anteriormente en un foro de seat leon tienen un hilo y todo.

 

En la app gratuita no aparece lo del vídeo en movimiento, al menos yo no lo he visto.

 

Por cierto, esto servirá sólo para un coche o se podrá usar en varios?

 

Por si lo asocia a un número de bastidor único o se pueden tener varios. (Aunque en la app veo que deja añadir varios coches, imagino que se podrá usar en varios)

Enlace al comentario
Compartir en otros sitios web

Hola a todos, les escribí a esta gente para que me confirmasen si funcionaba el VIM en nuestro coche y me comentaron que solo está habilitado para el MMI TOUCH de 7", que el de la pantalla de 5,8" estan trabajando en ello. Tiene muy buena pinta ademas de poder codificar modulos pero habrá que esperar los que tenemos la oantalla básica.

Enlace al comentario
Compartir en otros sitios web

Me parece una opcion increible!!!! y super sencilla a la vez. Para los que tenemos el mmi basic con navi podemos ver videos aunque sea en parado? porque aun no lo logro conseguir ver ni en parado... Como funcione todo lo que explican me lo pillare seguro!!!! ya os ire leyendo atentamente!!!

Enlace al comentario
Compartir en otros sitios web

Me parece una opcion increible!!!! y super sencilla a la vez. Para los que tenemos el mmi basic con navi podemos ver videos aunque sea en parado? porque aun no lo logro conseguir ver ni en parado... Como funcione todo lo que explican me lo pillare seguro!!!! ya os ire leyendo atentamente!!!

 

En parado sí puedes ver vídeo, el desbloqueo es para cuando te pongas en marcha, no se corte.

Si no ves los vídeos ahora es que no cumples los requisitos de formato del reproductor. Viene explicado en el manual del MMI que ahora mismo no tengo aquí.

Enlace al comentario
Compartir en otros sitios web

He estado mirando el programa un poco, parece bastante interesante y sobretodo, mucho más barato que las otras soluciones para el VIM.

 

Faltaría saber si funciona la aplicación con cualquier adaptador ODB2 bluetooth chino, porque entonces el precio sería bastante ridículo:

 

adaptador BT - 5€ - http://www.amazon.es/dp/B015CCJD0S

Aplicación - gratuita*

 

Necesitas 100 créditos dentro de la app para desbloquear el VIM, que según su web valen 12€+iva
Info: http://obdeleven.proboards.com/thread/7/faq-application-usage

 

Es decir, por unos 21€ estaría el VIM desbloqueado.

 

Si lo compras para activar más cosas o como sustituto del vagcom, está claro que entonces compensa ya el pack completo.

Editado por FrA1l3
Enlace al comentario
Compartir en otros sitios web

Unirse a la conversación

Puedes publicar ahora y registrarte más tarde. Si tienes una cuenta, conecta ahora para publicar con tu cuenta.

Guest
Responder a esta discusión...

×   Pegar como texto enriquecido.   Pegar como texto sin formato

  Sólo se permiten 75 emoji.

×   Tu enlace se ha incrustado automáticamente..   Mostrar como un enlace en su lugar

×   Se ha restaurado el contenido anterior.   Limpiar editor

×   No se pueden pegar imágenes directamente. Carga o inserta imágenes desde la URL.

  • Explorando recientemente   0 miembros

    • No hay usuarios registrados viendo esta página.