Configurar RNS-E

[kaske]

Pues uno más que se pasa al RNS-E ya he pedido la versión LED y he encargado las llaves de extracción y también un VAGCOM, el caso es que me gustaría saber que es lo que tengo que configurar en el vag para que este todo correcto, ya que no tengo ni idea y sumado a que va a ser la primera vez que uso un VAGCOM, no vaya a ser que la lie... Mi coche tiene bluetooth de serie y sistema de sonido BOSE, que por lo que he leído tiene que llevar configuraciones diferentes. La antena diversity lo dejo pendiente, primero compruebo si va más o menos aceptable ya que la radio poco la uso.

[kaske]

Nadie?¿

[A420TDI]

Hola este es un tema muy hablado, pero mirate esto:

 

Coding

• 0?xxxxx: Model
  • 1 = Lamborghini
  • 2 = Audi A3 (8P)
  • 3 = Audi A4 (8E)
  • 4 = Audi A4 Cabriolet (8H)
  • 5 = Audi A6 (4B)
  • 6 = Audi TT (8J)
  • 7 = Audi R8 (42)
• 0x?xxxx: Treble Speaker Monitoring inactive
  • 0 = Front Treble Speaker Monitoring inactive active (NOT Audi A4 Cabriolet)
  • 1 = Front Treble Speaker Monitoring inactive inactive (ONLY Audi A4 Cabriolet)
• 0xx?xxx: Sound Characteristic
  • 0 = Sound Characteristic linear
  • 1 = Audi A4 (8E)
  • 2 = Audi A6 (4B)
  • 3 = Audi A4 Cabriolet (8H)
  • 4 = Audi TT (8J)
  • 5 = Audi A3 (8P)
  • 9 = Sound System
• 0xxx?xx: Telephone/Telematic
  • 1 = Telephone not installed (Remote Feed Voltage for Microphone active)
  • 2 = Base Plate (Temic - Remote Feed Voltage for Microphone inactive)
  • 3 = Base Plate (Cullmann - Remote Feed Voltage for Microphone inactive)
  • 4 = Base Plate (Nokia - Remote Feed Voltage for Microphone inactive)
  • 5 = Telematic Europa (Remote Feed Voltage for Microphone inactive)
  • 6 = Telematic US (Remote Feed Voltage for Microphone inactive)
  • 7 = Base Plate diagnostic capable with Comfort Control
• 0xxxx?x: Equipment I
  • 1 = Tuner not installed
  • 2 = Digital-Radio installed
  • 3 = Satellite-Radio installed
  • 4 = Satellite and Digital-Radio installed
  • 5 = Analog Input (AUX) installed
  • 7 = Satellite-Radio & Analog Input (AUX) installed
• 0xxxxx?: Equipment II
  • 1 = TV-Tuner/CD-Changer/Multi-Function Steering Wheel not installed
  • 2 = TV-Tuner installed
  • 3 = CD-Changer installed
  • 4 = TV-Tuner and CD-Changer installed
  • 5 = Multi-Function Steering Wheel installed
  • 6 = TV-Tuner and Multi-Function Steering Wheel installed
  • 7 = CD-Changer and Multi-Function Steering Wheel installed
  • 8 = TV-Tuner and CD-Changer and Multi-Function Steering Wheel installed
    

 

Adaptation Channel 001: Tire Circumference

The tire circumference is being adapted in "mm".

Channel 002: Wheel Pulse

The wheel pulse describes the amount of wheel pulses per revolution.
If value 0 is entered the system calibrates automatically itself after several kilometers and inputs a value.

• 43 = Audi A3 (8P) / Audi TT (8J)
• 45 = Audi A4 (8E)

 

Channel 003: Language (Screen)

• 0 = German
• 1 = English (UK)
• 2 = French
• 3 = Italian
• 5 = Spanish
• 6 = Portuguese
• 7 = English (UK)

 

Channel 004: Back-Up Camera

• 0 = Back-Up Camera not installed
• 2 = Back-Up Camera installed

 

Channel 005: Speed Threshold (Video Input)

• 0 = max. 0 kph or 0 mph
• 1 = max 5 kph (Standard for Europe)

 

Channel 007: Options Channel 008: Volume Characteristic Channel 010: Region

• 0 = Europe/North America
• 1 = Australia/South America
• 2 = South Africa

 

Channel 011: Language (Speech Recognition)

• 0 = German
• 1 = English
• 2 = French
• 3 = Italian
• 5 = Spanish

 

Channel 018: Start Screen

The start screen setting has to correspond with the control module coding, e.g. a S3 start screen doesn't work with an A4 coding.

• 0 = Standard Start Screen
• 1 = Audi S3 Start Screen
• 2 = Audi S4 Start Screen
• 3 = Audi RS4 Start Screen
• 4 = Audi TT Start Screen
• 5 = Audi R8 Start Screen

 

Channel 065: Read Test Channel 066: Self Test Channel 067: CD/DVD Drive

• 000 - Normal/Eject-Button enabled
• 001 = Eject CD/DVD (will not be saved)
• 255 = Eject-Button disabled/locked (Anti-Theft-Protection)

 

Channel 068: Screen Test

Values will not be saved, they only act as initiation for each Test Picture.

• 0 = No Test Picture
• 1 = Test Picture: Red
• 2 = Test Picture: Green
• 3 = Test Picture: Blue
• 4 = Test Picture: White
• 5 = Test Picture: Black
• 6 = Test Picture: Checkerboard
• 7 = Test Picture: Checkerboard (inverted)
• 8 = Test Picture: 64 Gray Scales (vertical Bars)
• 9 = Test Picture: Special

 

Channel 069: Display Mechanism

• 000 = Display closed
• 001 = Display open
• 200 = Display half open (Obstacle)
• 255 = Position undefined

 

Channel 070: Display Brightness

• 0 = 0% Brightness (Display OFF)
• 1 = 20% Brightness
• 2 = 40% Brightness
• 3 = 60% Brightness
• 4 = 80% Brightness
• 5 = 100% Brightness

 

Channel 099: Transport Mode

Only applies to models without Gateway/Diagnostic Interface for Databus.

• 0 = Transport Mode inactive
• 1 = Transport Mode active

 

Channel 111: Reset

• To perform a system reset/restart save 1 as new value.

 

Channel 114: FM Frequency

• Range: 875...1080

 

Channel 117: Signal Test (Output)

• 0 = Fader Center & Balance Center
• 1 = Fader Front & Balance Left
• 2 = Fader Front & Balance Right
• 3 = Fader Rear & Balance Left
• 4 = Fader Rear & Balance Right

 

Channel 136: Driver Position

• RNS-E Basic
  • 03226 = Left-Hand-Drive (LHD)
  • 02632 = Right-Hand-Drive (RHD)
• RNS-E High/US
  • 00005 = Left-Hand-Drive (LHD)
  • 00013 = Right-Hand-Drive (RHD)

[kaske]

Esto ya lo tengo configurado, peor aún así me siguen saliendo estos errores.

 

00-Steering Angle Sensor -- Status: OK 0000

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

08-Auto HVAC -- Status: OK 0000

09-Cent. Elect. -- Status: Malfunction 0010

15-Airbags -- Status: OK 0000

16-Steering wheel -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: OK 0000

22-AWD -- Status: OK 0000

25-Immobilizer -- Status: OK 0000

37-Navigation -- Status: Malfunction 0010

42-Door Elect, Driver -- Status: OK 0000

44-Steering Assist -- Status: OK 0000

46-Central Conv. -- Status: OK 0000

52-Door Elect, Pass. -- Status: OK 0000

55-Xenon Range -- Status: OK 0000

56-Radio -- Status: Malfunction 0010

76-Park Assist -- Status: OK 0000

77-Telephone -- Status: Malfunction 0010

-------------------------------------------------------------------------------

Address 37: Navigation Labels: 8E0-035-192-RNSE.lbl

Part No SW: 8P0 035 193 G HW: 8P0 035 193 G

Component: RNS-E PU EU H06 0220

Revision: 0000012S S/Users/albertocasqueiro/Documents/COMPARTIDA WINDOWS/Log-WAUZZZ8PX7A227474-120420km-74825mi2.txterial number: AUZBZ7LD211106

Coding: 0219723

Shop #: WSC 00030 211 17584

VCID: 346CABBA57EC79B8F5D

3 Faults Found

00858 - Connection; Radio ZF Output to Antenna Amplifier

007 - Short to Ground

Freeze Frame:

Fault Status: 01100111

Fault Priority: 5

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:46:02

Freeze Frame:

Mileage: 120420 km

Count: 912

Clock: 19:45

01044 - Control Module Incorrectly Coded

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 7

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:47:28

02005 - Coding Pin

004 - No Signal/Communication

Freeze Frame:

Fault Status: 01100100

Fault Priority: 5

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:46:02

Address 56: Radio Labels: 8E0-035-192-RNSE.lbl

Part No SW: 8P0 035 193 G HW: 8P0 035 193 G

Component: RNS-E PU EU H06 0220

Revision: 0000012S Serial number: AUZBZ7LD211106

Coding: 0219723

Shop #: WSC 00030 211 17584

VCID: 346CABBA57EC79B8F5D

3 Faults Found

00858 - Connection; Radio ZF Output to Antenna Amplifier

007 - Short to Ground

Freeze Frame:

Fault Status: 01100111

Fault Priority: 5

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:46:02

Freeze Frame:

Mileage: 120420 km

Count: 912

Clock: 19:45

01044 - Control Module Incorrectly Coded

000 - -

Freeze Frame:

Fault Status: 01100000

Fault Priority: 7

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:47:28

02005 - Coding Pin

004 - No Signal/Communication

Freeze Frame:

Fault Status: 01100100

Fault Priority: 5

Fault Frequency: 1

Reset counter: 92

Mileage: 120428 km

Time Indication: 0

Date: 2013.12.09

Time: 19:46:02

Address 77: Telephone Labels: 8P0-862-335.lbl

Part No SW: 8P0 862 335 K HW: 8P0 862 335 K

Component: FSE_255x BT H26 0340

Revision: 00000000 Serial number: 00000005140344

Coding: 0011455

Shop #: WSC 00231 572 75251

VCID: 3E78899269A0A3E8139

1 Fault Found

01523 - Microphone for Telephone (R38)

011 - Open Circuit

Freeze Frame:

Fault Status: 01101011

Fault Priority: 5

Fault Frequency: 2

Reset counter: 81

Mileage: 120327 km

Time Indication: 0

Date: 2013.12.07

Time: 21:23:22

End ---------------------------------------------------------------------

[kaske]

Hola, buscando por diversos temas he pensado que igual no me funciona el micro una vez puesto el RNS-E porque tengo que puntearlo al RNS-E, mi RNS-E está actualizado a la versión 660, significa esto que tiene SDS?

[kaske]

Me acabo de fijar y la versión que tengo es la 220, como podría poner SDS?