Jump to content

Graphco

Miembros
  • Mensajes

    8
  • Ingresó

  • Última visita

Logros de Graphco

Rookie

Rookie (2/14)

  • Primer Post
  • Iniciar Conversación
  • Una Semana a bordo
  • Un Mes después
  • Un año por aquí

Insignias recientes

0

Reputación

  1. Hello you need an HEX CAN intreface for your Audi as described here. Also; I can provide one cable plus software Hola What Cars Use CAN for Diagnostics? All Golf-5 platform cars (A5 platform) 2003+ VW Touran (1T chassis) 2004+ VW Golf (1K chassis) 2004+ VW Caddy (2K chassis) 2004+ Audi A3 (8P chassis) 2004+ Seat Altea (5P chassis) 2004+ Skoda Octavia (1Z chassis) 2005+ Seat Toledo (5P chassis) 2005+ Golf Plus (5M chassis) 2005+ Seat Leon (1P chassis) 2005.5+ Jetta (1K chassis) 2003+ Audi A8 and A8L (D3 platform, 4E chassis) 2005+ Audi A6 (C6 platform, 4F chassis) 2005+ Audi A4 ("B7" platform) (some control modules) 2005.5+ VW Passat (B6 Platform, 3C chassis)
  2. You have replace the airbag ? If no and wanna disable the yellow light follow this step: 1) determine if your car can do this. Use VAG-COM (or equivalent) to access the airbag controller. Look at the Component box in the upper right corner. In the middle of the string you should see 'VWx' where x is a number. This number must be 5 or higher. Anything lower requires a special resistance kit installation (1J0 998 521). An exception to this is VW3 with part number 1J0 909 609. This controller does not require the resistance connector. 2) Click on 10-Adaptation 3) Click up for the channel number to get to channel 01. This is the passenger front airbag channel. The value is 0 (zero) for 'enabled'. Click the up arrow to make it a '1'. Click 'Save' and confirm the prompt. This will disable that airbag. For the other airbags, disabling them is a matter of choosing a different channel. 1 - passenger front 2 - driver front (steering wheel) 3 - passenger side (seat airbag) 4 - driver side 5 - passenger belt tensioner 6 - driver belt tensioner 7 - passenger head 8 - driver head Enabling the airbag is just a matter of performing the same steps but decrementing the channel value from 1 to 0. Hope this helps Graphco
  3. Graphco

    no me va el mando!

    I am not sure if I had understand well... But I think you have to Recode with LONG CODING option..write down the HEX key in you Auto SCAN (46Channell) and then recode with the old key that you have saved ...Or better send the whole autoscan ( CAN version?) Which car model Ciao
  4. Graphco

    version VAG COM

    hELLO I have the HEX CAN USB cable and 5.12 software write me graphco@libero.it Bye
  5. You need an HEX CAN cable plus VAG com diagnostic
  6. KKL FOR SURE KKL 409.1 VAG-COM
  7. Hola this is the model for you : Cheap and easy to use KKL 409.1 VAG-COM You can find it on ebay
  8. Graphco

    HEX CAN USB VAG

    Hello , I have 5 HEX CAN USB cable FULLY FUNCTIONAL really tested In my officine ( plus than 30 car VW and AUDi) The price includede the Software is 99 € + shipping to Spain Compatibility Please send me an email * All Golf-5 platform cars (A5 platform) including: o 2003+ VW Touran (1T chassis) o 2004+ VW Golf (1K chassis) o 2004+ VW Caddy (2K chassis) o 2004+ Audi A3 (8P chassis) o 2004+ Seat Altea (5P chassis) o 2004+ Skoda Octavia (1Z chassis) o 2005+ Seat Toledo (5P chassis) o 2005+ Golf Plus (5M chassis) o 2005+ Seat Leon (1P chassis) o 2005.5+ Jetta (1K chassis) * 2003+ Audi A8 and A8L (D3 platform, 4E chassis) * 2005+ Audi A6 (C6 platform, 4F chassis) * 2005+ Audi A4 ("B7" platform) (some control modules) * 2005.5+ VW Passat (B6 Platform, 3C chass)i